Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Elustondo, Diego" seçeneğine göre listele

Listeleniyor 1 - 1 / 1
Sayfa Başına Sonuç
Sıralama seçenekleri
  • Yükleniyor...
    Küçük Resim
    Öğe
    Effect of thermal modification on the properties of narrow-leaved ash and chestnut
    (Elsevier, 2012) Korkut, Süleyman; Korkut, Derya Sevim; Kocaefe, Duygu; Elustondo, Diego; Bajraktari, Agron; Çakıcıer, Nevzat
    The concept of thermal modification has evolved from a challenging research program to commercial reality in several European countries in recent years. The aim of this study is to determine the change of various physical properties (oven-dry density, air-dry density, weight loss, swelling and anti-swelling efficiency (ASE)), compression strength parallel to grain, colour difference (Delta E), glossiness and surface roughness of narrow-leaved ash (Fraxinus angustifolia Vahl.) and chestnut (Castanea sativa Mill.) woods after heat treatment under different temperatures and durations. For this study two different temperatures (160 degrees C and 180 degrees C) and two different durations (2h and 4h) were considered. A stylus method was employed to evaluate the surface characteristics of the samples. Roughness measurements by the stylus method were made in the direction perpendicular to the fiber. Four main roughness parameters which are mean arithmetic deviation of profile (RA, mean peak-to-valley height (R-z), root mean square roughness (R-q), and maximum roughness (R-y) obtained from the surface of wood were used to evaluate the effect of heat treatment on the surface characteristics of the specimens. The properties studied were significantly different (p=0.05) at two temperatures and two durations of heat treatment. Based on the findings of this study, the results showed that oven-dry density, air-dry density, swelling, compression strength parallel to grain and surface roughness decreases with increasing heat treatment temperature and time. (C) 2011 Elsevier B.V. All rights reserved.

| Düzce Üniversitesi | Kütüphane | Açık Erişim Politikası | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Düzce Üniversitesi, Kütüphane ve Dokümantasyon Daire Başkanlığı, Düzce, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

DSpace 7.6.1, Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2025 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim