Yazar "Yalama, Ahmet" seçeneğine göre listele
Listeleniyor 1 - 3 / 3
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Farklı stabilizasyon malzemelerinin sıkıştırılmış kil duvarların fiziksel ve mekanik özelliklerine etkisi(Düzce Üniversitesi, 2015) Yalama, Ahmet; Emiroğlu, MehmetAlternatif yapı teknikleri üzerine yapılan araştırmalar, çevreci yapıların önem kazanmasıyla artmaktadır. Dünya üzerinde çeşitli çevreci yapı malzemeleri ile üretilen yapı tasarımları bulunmakta olup bunlardan biri de sıkıştırılmış kil duvar tekniğidir. Sıkıştırılmış kil duvarlar, belirli oranlarda kil, agrega ve suyun karıştırılıp kalıp içerisine katmanlar halinde yayılarak sıkıştırılması ile üretilen çevreci, yenilenebilir, sağlıklı ve ekonomik bir yığma yapım tekniğidir. Ülkemizde kerpiç ve hımış gibi malzeme ve üretim tekniği açısından sıkıştırılmış kil duvarlara benzer yığma yapım uygulamalarına rastlanmakla birlikte, sıkıştırılmış kil duvarlar dayanım ve dayanıklılık açısından farklılık arz etmektedir. Ayrıca sıkıştırılmış kil duvarlar sağlık, enerji verimliliği ve çevreye duyarlılık gibi hususlarda yığma duvar sistemlerinden daha iyi performans sergilemektedir. Bu çalışmada, farklı kil/kum oranlarında numuneler hazırlanarak birim hacim ağırlık ve basınç dayanımı kriterleri göz önünde bulundurularak en uygun kil/kum oranı belirlenmiştir. Daha sonra, maksimum kuru birim hacim ağırlıktaki optimum su oranını belirlemek için standart sıkıştırma (proktor) deneyi yapılmıştır. Devamında takviye yapılacak karışım oranları ile hazırlanan 15x30 cm silindir ve 10x10x50 cm prizma numuneler üzerinde basınç dayanımı, birim hacim ağırlık, eğilme dayanımı, ultrases geçiş hızı, rezonans frekansı deneyleri yapılıp en iyi özelliklere sahip karışımlar belirlenmiştir. Sonuç olarak, tüm kil duvar karışımlarının kuru haldeki birim hacim ağırlıklarının 2.05 gr/cm³ değerinden düşük olduğu; çimento, çimento-dolomit ve çimento-yüksek fırın cürufu takviyeli kil duvarların dayanım değerlerinin ülkemizin deprem yönetmeliğinde taşıyıcı duvarlardan istenen minimum 5 MPa kriterini sağladığı, ultrases geçiş hızı ve rezonans frekansı deney sonuçlarının elde edilen veriler ile tutarlılık gösterdiği, %10 çimento-%0.5 cam lifi ve %10 çimento-%1 cam lifi takviyeli sıkıştırılmış kil duvar numunelerinin en yüksek performansa sahip olduğu belirlenmiştir.Öğe Performance of ready-mixed clay plasters produced with different clay/sand ratios(Elsevier Science Bv, 2015) Emiroğlu, Mehmet; Yalama, Ahmet; Erdoğdu, YaseminRecent studies have shown that the usage of earthen building materials such as adobe, rammed earth and clay plaster has increased due to their moisture balancing and breathing characteristics, availability of their raw materials, suitable costs, sustainability and environmentally friendly properties. Although making adobe and clay plaster is quite an old building application, nowadays, more durable clay plasters can be produced on the basis of quality control in the industrial sense. In the literature, there are many studies dealing with adobe and rammed earth materials. However, investigations covering the characteristics of clay plasters are limited. In this study, the performance of ready-mixed clay plasters was examined with regard to the moisture content of the samples during the test, the mixture content of the water and the clay/sand ratios. Compressive strength and shrinkage (volumetric and observational) of the clay plasters were considered as key parameters for the performance analysis. In addition, simple field tests, used for analysis of the composition of earth building materials, were carried out in order to evaluate the effect of the clay/sand ratio on the performance of the clay plasters. As a result, an increase in the initial water content of the mixture and/or the moisture content of the samples during the test had a negative effect on the compressive strength. Furthermore, the optimum clay/sand ratio was between 0.43 and 0.66 by weight when the shrinkage and compressive strength results were considered all together. (C) 2015 Elsevier B.V. All rights reserved.Öğe Structural behavior of rammed earth walls under lateral cyclic loading: A comparative experimental study(Elsevier Sci Ltd, 2017) Arslan, Mehmet Emin; Emiroğlu, Mehmet; Yalama, AhmetRammed earth is one of the oldest masonry construction techniques such that there are many ancient structures built of rammed earth still existing. Recently, applications Of rammed earth are encountered more often, due to its ecological advantages such as renewability, sustainability, environmental protection, insulation and use of environmentally-friendly materials. Although it has been widely used in masonry construction, knowledge related to behavior of these structures or structural members is limited. Under this circumstance, in this study, behaviors of stabilized and non-stabilized rammed earth walls were investigated comparatively with masonry brick and aerated concrete walls. For this purpose, non-stabilized, 10% cement stabilized, 10% cement stabilized with 1% glass fibers and 5% cement stabilized with 5% blast furnace slag mixtures were produced in dimensibns of 20 cm x 150 cm x 150 cm rammed earth walls. Cyclic behaviors of the rammed earth walls were compared with masonry brick and aerated concrete walls with the same dimensions by using hinged loading test set-up. Structural properties such as load carrying capacities, total energy dissipation and stiffness degradation of the masonry walls were determined by utilizing the results of cyclic loading tests. At the end of the study, it was concluded that rammed earth wall stabilized using 10% cement showed the best structural performance. Surprisingly, performance of masonry brick wall fell behind of other masonry walls, even though it is the most commonly used material in masonry constructions. (C) 2016 Elsevier Ltd. All rights reserved.