Yazar "Uysal, Cuneyt" seçeneğine göre listele

Listeleniyor 1 - 3 / 3
  • Küçük Resim
    Öğe
    Energy, exergy, economic and sustainability assessments of a compression ignition diesel engine fueled with tire pyrolytic oil - diesel blends
    (Elsevier Sci Ltd, 2020) Karagoz, Mustafa; Uysal, Cuneyt; Agbulut, Umit; Saridemir, Suat
    Every year, millions of tons of tire become unusable around the world and waste tire dumps threaten human health and the environment. Therefore, recycling of waste tires has attracted attention recently. In this study, energy, exergy, economic and sustainability analyses of a compression ignition diesel engine fueled with tire pyrolytic oil-diesel blends were performed and the results were compared with that of neat diesel. Tire pyrolytic oil was produced from waste tires with vacuum pyrolysis technique. Hydro-sulfuric acid treatment, vacuum distillation and oxidative desulfurization processes were applied to reduce emission values of tire pyrolytic oil. Tire pyrolytic oil was blended with neat diesel as 10 vol% (TPO10D90), 30 vol% (TPO30D70) and 50 vol% (TPO50D50). The test engine was single-cylinder, four-stroke, naturally aspirated, compression ignition diesel engine and the experiments were conducted for different test engine loads of 3 Nm, 6 Nm, 9 Nm and 12 Nm at constant crankshaft speed of 2000 rpm. The highest energy and exergy efficiencies were obtained for TPO10D90, while the lowest ones were obtained for neat diesel. At 12 Nm, the energy efficiency of test engine was obtained to be 26.89% for neat diesel and 28.15% for TPO10D90, while the exergy efficiency of test engine was found to be 25.19% for neat diesel and 26.36% for TPO10D90. The energy loss per capital investment cost was obtained to be 0.87 x 10(-4) kW/$ for TPO10D90 and 1.03 x 10(-4) kW/$ for neat diesel at 3Nm. At 12 Nm, the highest sustainability index was determined to be 1.358 for TPO10D90, while the lowest sustainability index was 1.337 for neat diesel. Results showed that TPO10D90 had better performance at each test engine load in terms of energy, exergy, economic and sustainability and the increase in tire pyrolytic oil content of blend made the results worse but better than neat diesel. As a conclusion, it can be said that tire pyrolytic oil production from waste tires is important fact from the viewpoint of both waste management and protection of fossil fuel resources depletion. (C) 2020 Elsevier Ltd. All rights reserved.
  • Küçük Resim
    Öğe
    Exergetic and exergoeconomic analyses of a CI engine fueled with diesel-biodiesel blends containing various metal-oxide nanoparticles
    (Pergamon-Elsevier Science Ltd, 2021) Karagoz, Mustafa; Uysal, Cuneyt; Agbulut, Umit; Saridemir, Suat
    Comprehensive exergetic and exergoeconomic analyses of a single-cylinder, four-stroke, naturally aspirated compression ignition (CI) diesel engine were conducted in the present paper. Exergy-based sustainability indicators were also determined in the study. The test engine was fueled with diesel fuel (D100), %90 diesel+10% waste cooking oil methyl ester blend (D90B10), D90B10 with Al2O3 nanoparticle of 100 ppm (D90B10Al(2)O(3)), D90B10 with TiO2 nanoparticle of 100 ppm (D90B10TiO(2)), and D90B10 with SiO2 nanoparticle of 100 ppm (D90B10SiO(2)) nanofuels, separately. The tests were performed at a constant engine speed of 2000 rpm and at varying engine loads from 2.5 to 10 Nm with an increment of 2.5 Nm. As a result, the exergy efficiencies of the test engine for D90B10 and D90B10Al(2)O(3) were determined to be 25.57% and 28.12%, respectively. The lowest cost flow rate of crankshaft work was found to be 0.4247 US$/h at 2.5 Nm, 0.5154 US$/h at 5 Nm for D90B10Al(2)O(3), and 0.6029 US$/h at 7.5 Nm, 0.7253 US$/h at 10 Nm for D90B10SiO(2). At 10 Nm, the highest and lowest sustainability index values were determined to be 1.391 for D90B10Al(2)O(3) and 1.344 for D90B10, respectively. From the perspective of exergy and sustainability, D90B10Al(2)O(3) had the best results. Besides, from the perspective of exergoeconomics, D90B10Al(2)O(3) had the best results at lower engine loads. As a conclusion, it can be said that nanofuels showed better performances compared to neat diesel fuel and diesel-biodiesel blend in the terms of in terms of exergy, exergoeconomics, and sustainability analyzes. Considering all analyses together, it is noticed that Al2O3-doped nanofuel is the best test fuel for this study, and then it is followed by SiO2 and TiO2-doped nanofuels, respectively. (C) 2020 Elsevier Ltd. All rights reserved.
  • Küçük Resim Yok
    Öğe
    Exergetic and exergoeconomic assessments of a diesel engine operating on dual-fuel mode with biogas and diesel fuel containing boron nitride nanoparticles
    (Springer, 2024) Uysal, Cuneyt; Agbulut, Umit; Topal, Halil Ibrahim; Karagoz, Mustafa; Polat, Fikret; Saridemir, Suat
    This study investigates the exergetic and exergoeconomic analyses of a diesel engine operated on dual-fuel mode with fuelled both diesel fuel-boron nitride nanofuel and biogas purchased commercially. The experiments were performed for diesel fuel, diesel + 100 ppm boron nitride nanoparticle, diesel + 100 ppm boron nitride nanoparticle + 0.5 L min-1 biogas, diesel + 100 ppm boron nitride nanoparticle + 1.0 L min-1 biogas and diesel + 100 ppm boron nitride nanoparticle + 2.0 L min-1 biogas at various engine loads (2.5 Nm, 5.0 Nm, 7.5 Nm, and 10.0 Nm) and fixed crankshaft speed of 1500 rpm. The obtained experimental data were used to realize exergetic and exergoeconomic analyses. Among the fuels considered in this study, diesel + 100 ppm boron nitride nanoparticle nanofuel had the best exergetic and exergoeconomic results. As a result, at engine load of 10 Nm, the exergy efficiency of test engine and specific exergy cost of crankshaft work were obtained to be 29.12% and 124.86 US$ GJ-1 for diesel + 100 ppm boron nitride nanoparticle nanofuel, respectively. These values were 27.35% and 125.19 US$ GJ-1 for diesel fuel, 25.50% and 141.92 US$ GJ-1 for diesel + 100 ppm boron nitride nanoparticle + 0.5 L min-1 biogas, 23.10% and 156.33 US$ GJ-1 for diesel + 100 ppm boron nitride nanoparticle + 1.0 L min-1 biogas, and 21.09% and 171.92 US$ GJ-1 for diesel + 100 ppm boron nitride nanoparticle + 2.0 L min-1 biogas, respectively. It is clear that biogas addition to combustion made worse the exergetic and exergoeconomic performances of test engine. As a conclusion, it can be said that diesel + 100 ppm boron nitride nanoparticle nanofuel can be used as alternative fuel to D100 in terms of exergy and exergoeconomics.