Kılınç, İzhamBudakçı, MehmetKorkmaz, Mustafa2023-07-262023-07-2620231930-2126https://doi.org/10.15376/biores.18.1.1185-1205https://hdl.handle.net/20.500.12684/13141This study determined some physical changes that occur on wood surfaces aged in a marine environment resulting from the removal of coatings using environmentally friendly media blasting. Scots pine (Pinus sylvestris L.) wood coated with water-borne and synthetic paints was exposed to a marine environment for 100 days. The aged paint layers were removed using five different media (sodium bicarbonate, hazelnut shell granules, corncob granules, walnut shell granules, and apricot kernel granules), varying blasting angles (45° and 90°), blasting distances (7 and 10 cm), air pressures (2 and 2.5 bar), and nozzle diameters (0.5 and 0.8 mm) using an automated blasting cabinet. The results showed that corn cob granules and sodium bicarbonate were less effective than other media for removing paint layers at the application parameters. The samples were tested for hardness, gloss, and total color change. Samples exhibited a remarkable total color change and gloss increase when the blasting distance was increased from 7 cm to 10 cm, while their hardness decreased. The highest gloss value was obtained on surfaces blasted with a nozzle diameter of 0.5 cm. Surfaces blasted with a nozzle diameter of 8 mm, however, yielded the highest total color change and hardest values. © 2023, North Carolina State University. All rights reserved.en10.15376/biores.18.1.1185-1205info:eu-repo/semantics/openAccessAbrasive blasting mediaColor changeGlossHardnessPaint removalSea water ageingBlastingColorColorimetryGranulationNozzlesPaintSeawaterSodium bicarbonateAbrasive blastingAbrasive blasting mediumColor changesGlossMarine environmentNozzle diameterPaint layersPaint removalsSea water ageingWood surfacesHardnessColorimetryGranulationNozzlesPaintSodium BicarbonateArticle181118512052-s2.0-85144249345WOS:000951050600020Q3Q2